Overview
After you add, install, and activate TurboTier, configure the schedule that the TurboTier follows to synchronize backup data to the cloud storage.
Set the resources such as the data volume and maximum bandwidth. You must map the backup sets with TurboTier, and define a retention period for each backup set. TurboTier backs up data from the servers and virtual machines, and maintains the data for the configured retention period. After the retention period for a backup set is over, the TurboTier tries to free the space on the TurboTier by removing the non-referenced files.
TurboTier synchronizes the backup data to the Cloud according to the set synchronization schedule.
📝 Note
TurboTier only stores backup data. The metadata is saved to the Cloud storage. Therefore, you only need to create the Data folder at the time of configuration.
You need to perform the following steps to configure your TurboTier:
Step 1: Provide general information
Step 2: Attach backup sets
Step 1: Provide general settings
Log in to the Management Console.
Click Manage > TurboTier. Note that if the All Organizations menu is enabled, you have to first select an organization and then click Manage > TurboTier.
The TurboTier devices are listed in two tabs – Unconfigured and Configured. Each TurboTier device has an icon next to it that shows the TurboTier release.
Under the Unconfigured tab, select a TurboTier that is in the Activated status.
Click Configure.
The Configure TurboTier page opens.
Provide the following details:Data Volume
Select Data Volume:
Browse the data volumes on the TurboTier server and select a data volume.
📝 Note
Your server data is saved to the
datafolder, and the metadata is saved to the cloud storage.Symbolic links and mounted folders do not appear in the folder structure.
TurboTier does not support UNC shares. Ensure that you select a local data folder.
Volume size: The size that this volume can accommodate in GB.
Local Retention
Retain backups for: The number of days for which the recovery points of the selected backup sets will reside on the TurboTier.
Upload schedule: Synchronization occurs as per the TurboTier synchronization schedule. The synchronization schedule follows the TurboTier time zone. For example, if you set the synchronization start time to 6 AM, the synchronization operation from the TurboTier located in New York and London starts at 6 AM EST and 6 AM UTC, respectively.
Days:
The days on which you want the TurboTier to synchronize backup data to the cloud storage.
📝 Note
We recommend that you create a separate schedule for weekdays and weekends. This is because you can benefit from the wider off-peak windows on weekends, and thus set a longer duration for synchronization operations.Start at (TurboTier Timezone):
The time when you want the TurboTier to start synchronization.
Backup Window (Hrs):
The duration in hours within which you want synchronization to occur.
📝 Note
If synchronization finishes early, TurboTier checks for new data every 10 minutes and syncs it to Cloud. For example, with a start time of 9 AM and a 4-hour duration, syncs continue until 1 PM, ensuring all new data is updated.
Max. Bandwidth (Mbps):The bandwidth in Megabits per second (Mbps) that you want the TurboTier to consume at the time of synchronizing backup data to the cloud storage.
Backup to Cloud, if unable to backup to Cache:
This option enables backing up directly to the Cloud if the Hybrid Workloads agent is unable to back up to the TurboTier. This may be due to one of the following reasons:
The TurboTier server is not reachable
TurboTier has run out of disk space.
If this option is not enabled, the backup operation fails. For more information, see True hot restore.
📝 Note
This functionality is available only for the Hybrid Workloads agents with version 3.2 r2743 or later on GovCloud only. For older versions, backups by default fall back to Cloud if the TurboTier server is not reachable or runs out of the disk space.
You can add more schedules by clicking Add Schedule in the Upload Schedule section. Click Next.
Step 2: Attach backup sets
In the Backup Sets tab, select one, multiple, or all the backup sets, and map to the TurboTier. You can use the backup set filter option to filter the backup set based on type or search using the backup set name.
A backup set represents the backed up data. It can be a bunch of files on your resource configured for backup. When you attach backup sets to the TurboTier, Druva backs up the data it represents and stores it on the TurboTier.
Click Finish.
The configured TurboTier appears under the Configured tab on the All TurboTier Devices page.
You can customize the view as per your preference, card view or grid view by clicking on the relevant button.
📝 Note
Whenever a backup set with existing recovery points is attached to a TurboTier, only the recovery points from the same day will be attached to the TurboTier. It won't synchronize the old backups from the cloud to the TurboTier.
Related keywords: configure_TurboTier_page, configure_TurboTier