Skip to main content
Configure CloudCache for Enterprise Workloads
Updated over a month ago

Enterprise Workloads Editions: ❌ Business | βœ… Enterprise | βœ… Elite

Overview

After you add, install, and activate CloudCache, configure the schedule that the CloudCache follows to synchronize backup data to the cloud storage.

Set the resources such as the data volume and maximum bandwidth. You must map the backup sets with CloudCache, and define a retention period for each backup set. CloudCache backs up data from the servers and virtual machines, and maintains the data for the configured retention period. After the retention period for a backup set is over, the CloudCache tries to free the space on the CloudCache by removing the non-referenced files.

CloudCache synchronizes the backup data to the Cloud according to the set synchronization schedule.


πŸ“ Note
​ CloudCache only stores backup data. The metadata is saved to the Cloud storage. Therefore, you only need to create the Data folder at the time of configuration.


You need to perform the following steps to configure your CloudCache:

  • Step 1: Provide general information

  • Step 2: Attach backup sets

Step 1: Provide general settings

  1. Log in to the Management Console.

  2. Click Manage > CloudCache. Note that if the All Organizations menu is enabled, you have to first select an organization and then click Manage > CloudCache.

  3. The CloudCache devices are listed in two tabs – Unconfigured and Configured. Each CloudCache device has an icon next to it that shows the CloudCache release.​

  4. Under the Unconfigured tab, select a CloudCache that is in the Activated status.

  5. Click Configure.
    The Configure CloudCache page opens.

    ConfigureCC_GeneralSettings.png


    Provide the following details:

    • Data Volume

      • Select Data Volume:

        Browse the data volumes on the CloudCache server and select a data volume.


        πŸ“ Note

        • Your server data is saved to the data folder, and the metadata is saved to the cloud storage.

        • Symbolic links and mounted folders do not appear in the folder structure.

        • CloudCache does not support UNC shares. Ensure that you select a local data folder.


    • Volume size: The size that this volume can accommodate in GB.
      ​

    • Local Retention
      ​

      • Retain backups for: The number of days for which the recovery points of the selected backup sets will reside on the CloudCache.
        ​

      • Upload schedule: Synchronization occurs as per the CloudCache synchronization schedule. The synchronization schedule follows the CloudCache time zone. For example, if you set the synchronization start time to 6 AM, the synchronization operation from the CloudCache located in New York and London starts at 6 AM EST and 6 AM UTC, respectively.

      • Days:

        The days on which you want the CloudCache to synchronize backup data to the cloud storage.
        ​


        πŸ“ Note
        ​ We recommend that you create a separate schedule for weekdays and weekends. This is because you can benefit from the wider off-peak windows on weekends, and thus set a longer duration for synchronization operations.


      • Start at (CloudCache Timezone):

        The time when you want the CloudCache to start synchronization.
        ​

      • Backup Window (Hrs):

        The duration in hours within which you want synchronization to occur.
        ​


        πŸ“ Note

        If synchronization finishes early, CloudCache checks for new data every 10 minutes and syncs it to Cloud. For example, with a start time of 9 AM and a 4-hour duration, syncs continue until 1 PM, ensuring all new data is updated.


      • Max. Bandwidth (Mbps):The bandwidth in Megabits per second (Mbps) that you want the CloudCache to consume at the time of synchronizing backup data to the cloud storage.
        ​

      • Backup to Cloud, if unable to backup to Cache:

        This option enables backing up directly to the Cloud if the Hybrid Workloads agent is unable to back up to the CloudCache. This may be due to one of the following reasons:

        • The CloudCache server is not reachable

        • CloudCache has run out of disk space.

          If this option is not enabled, the backup operation fails. For more information, see True hot restore.
          ​


          πŸ“ Note
          ​ This functionality is available only for the Hybrid Workloads agents with version 3.2 r2743 or later on GovCloud only. For older versions, backups by default fall back to Cloud if the CloudCache server is not reachable or runs out of the disk space.



    You can add more schedules by clicking Add Schedule in the Upload Schedule section. Click Next.
    ​

Step 2: Attach backup sets

  1. In the Backup Sets tab, select one, multiple, or all the backup sets, and map to the CloudCache. You can use the backup set filter option to filter the backup set based on type or search using the backup set name.
    A backup set represents the backed up data. It can be a bunch of files on your resource configured for backup. When you attach backup sets to the CloudCache, Druva backs up the data it represents and stores it on the CloudCache.
    ​

    ConfigureCC_SelectBackupset.png


    ​

  2. Click Finish.
    The configured CloudCache appears under the Configured tab on the All CloudCache Devices page.

clipboard_e186e4eb5c77f8834f37439d75356ac58.png


You can customize the view as per your preference, card view or grid view by clicking on the relevant button.


πŸ“ Note
​Whenever a backup set with existing recovery points is attached to a CloudCache, only the recovery points from the same day will be attached to the CloudCache. It won't synchronize the old backups from the cloud to the CloudCache.


Related keywords: configure_cloudcache_page, configure_cloudcache

Did this answer your question?